Product Description
PENNPLAN-HP is made from high-grade polyethylene resin produced by foreign and domestic large petrochemical enterprises by three-layer pressing and plastic formation technology and double-layer pressing and rolling technology. The company is the only enterprise that uses the two technologies to produce geo-membrane in the same industry.
Product Parameters
Basic Details:
PENNPLAN Geomembrane; pond liner
| Main Thickness |
0.2mm,0.3mm,0.5mm, 0.75mm,1.0mm,1.5mm,2.0mm |
| Main Width |
Within 1-8m |
| Main Length |
50m/100m/150m/200m or as required |
| Main Color |
Black, White, Blue, Green |
| Optional surface |
Textured or Smooth surface. |
| Material |
HDPE, LDPE,LLDPE,EVA |
| Payment |
LC, T/T, Small-amount payment |
PENNPLAN HDPE pond liner Technical Parameter
Spec
Properties |
Test method
ASTM |
PENNPLAN HP500 |
PENNPLAN HP750 |
PENNPLAN HP1000 |
PENNPLAN HP1500 |
PENNPLAN HP2000 |
PENNPLAN HP2500 |
| Thickness |
D5199 |
0.5mm |
0.75mm |
1.00mm |
1.50mm |
2.00mm |
2.50mm |
| Density (≥ g/cc) |
D1505 |
0.940 |
0.940 |
0.940 |
0.940 |
0.940 |
0.940 |
Tensile Properties
(Each direction) (≥)
• yield strength
• break strength
• yield elongation
• break elongation |
D 6693
Type IV |
8 kN/m
14kN/m
12%
700% |
11 kN/m
20kN/m
12%
700% |
15 kN/m
27 kN/m
12%
700% |
22 kN/m
40 kN/m
12%
700% |
29 kN/m
53 kN/m
12%
700% |
37kN/m
67kN/m
12%
700% |
| Tear Resistance (≥) |
D 1004 |
64 N |
93 N |
125 N |
187 N |
249 N |
311 N |
| Puncture Resistance (≥) |
D 4833 |
160 N |
240 N |
320 N |
480 N |
640 N |
800 N |
| Stress Crack Resistance (≥) |
D 5397 |
500 hr. |
500 hr. |
500 hr. |
500 hr. |
500 hr. |
500 hr. |
| Carbon Black Content |
D 1603 |
2.0-3.0% |
2.0-3.0% |
2.0-3.0% |
2.0-3.0% |
2.0-3.0% |
2.0-3.0% |
| Carbon Black Dispersion |
D 5596 |
Note(1) |
Note(1) |
Note(1) |
Note(1) |
Note(1) |
Note(1) |
Oxidative Induction Time (OIT) (≥)
(a)Standard OIT
- or -
(b)High Pressure OIT |
D 3895
D 5885 |
100 min.
400 min. |
100 min.
400 min. |
100 min.
400 min. |
100 min.
400 min. |
100 min.
400 min. |
100 min.
400 min. |
1. Good flexibility
2. For service temperature range:-70°C~110°C
3. Corrosion resistance, aging resistance
4. Excellent environmental stress cracking resistance property
5. High tensile strength and elongation
Main Features:
Good physical and mechanic performance;
High tearing resistance, strong deformation adaptability;
Puncture resisting, aging-resisting, ultra-violet radiation, oil and salt, alkali, and corrosion resistance;
High and low-temperature resistance, non-toxicity, long operational life;
Good waterproof, drainage, anti-seepage, and damp-proof effects;
Complete width and thickness specifications, low cost, and simple construction.
Packaging & Shipping
Product Application
(1) Environmental protection and sanitation projects (such as domestic waste landfills, sewage treatment plants, workshops, etc.)
(2) Water conservancy and civil engineering (river / lake / reservoir / dike anti-seepage, plugging, reinforcement, etc.)
(3) Municipal engineering (underground, underground construction of buildings and roof tanks, lining of sewage pipes, etc.)
(4) Landscaping (artificial lake, pond, pond lining of golf course, etc.)
(5) Petrochemical (chemical plant, oil refinery storage tank anti-seepage and anti-fouling, chemical reaction tank lining, etc.)
(6) Mining (washing pond, heap leaching pond, ash dump, etc.)
(7) Traffic engineering (highway foundation reinforcement, culvert seepage prevention, etc.)
(8) Agriculture (reservoir, reference basin, storage tank, anti-seepage of irrigation system, etc.)
(9) Aquaculture (lining of fish ponds, shrimp ponds, etc.)
(10) Polluting enterprises (phosphorite enterprises, sugar factories, etc.)
Installation Instructions
Upon request by the customer,PENNPLAN can also offer a full turnkey installation service,covering the materials manufactured by PENNPLAN,any other geosynthetics products,installation and all additional materials required to fully complete the project.
We can supply supervisors and installers,with or without welding equipment,such as machines and tools,to manage a group of local staff supplied by the customer.We can also provide training courses to staff provided by the customer.
· Do not pull or harden the geomembrane during installation. Ensure there are no sharp objects, roots or rocks on the base or side walls. Use a spade to clean up and get it as smooth as possible.80mil HDPE Liner 2mm High Strength
· Do not pull too tight, should leave a 1.50% margin for partial sinking and stretching. The slope is laid from top to bottom;
· The longitudinal joints of two adjacent frames shall not be on a horizontal line and shall be staggered by more than 1 m;
· The longitudinal joint should be 1.50m or more from the dam foot and the bent foot, and should be set on the plane;
· When laying the slope, the direction of the film should be basically parallel to the maximum slope line.
Company Profile
PENNPLAN is a leading and professional manufacturer of engineering materials
Though it is a very young & reorganized company, still inherited rich management experience from its predecessors well. As we know, how to produce and supply qualified products, is only a smaller part we can do for our clients; So how to supply the perfect construction solution and standard instruction manual will take a more and more important role in the future.
Though it owns a very young marketing team, they are energetic, ambitious, aggressive, and good at learning more professional knowledge from different roles, and we firmly believe that the clients are the best teachers, the competitors are the best motivators.
Now, PENNPLAN is fully devoted to engineering industries, the development road of Tech-Service Oriented Enterprises will keep in the whole life.
We′ Re committed to being the partner and friend that can be trusted by customers. The more important is we can supply installation guides by our experienced technicians, which can make projects faster and better.
In the future, PENNPLAN Co., Ltd will be guided by "Customer Satisfaction" and "Credit, Quality and Service" to create our own brand and offer the best materials and service for customers.
FAQ
1, Ask: What is the PAYMENT METHODS?
Re:T/T ,LC,Others
2, Ask: What is the LEAD TIME?
Re: Within 15 working days
3,Ask: What's your MOQ? Can I order small quantity for testing at first order?
Re:The MOQ is 1200 SQM,For new client, we accept small order for building mutual trust and long-term business relationship
4, Ask:How do you ensure the quality
Re:We are working with there QC processes to guarantee the quality :1.For raw materials;2.Onsite inspection during production;3,Final QC test for each batch of finished products
5, Ask:OEM OR ODM accepted?
Re:We can produce the geomembrane with our/client's brand as per customer's technical requirements
Audited Supplier 
){kind=link}